html
Don’t Replace Your Kinetico.

The complete step-by-step manual for finding the fault, replacing the seals and rebuilding the non-electric Kinetico twin-tank softener head yourself.
Full colour
Fully illustrated
Paperback 6 × 9 in
- Water running to the drain day and night
- Salt disappearing far too fast – or not being used at all
- Hard water and limescale coming back
- Stuck in regeneration, or never regenerating
- Leaking from the head
Before you pay for a service call or a new softener, read this book. Most of these faults come down to worn seals inside the head – and you can replace them yourself.
Three Steps To A Working Softener
Look Inside
Clear layout, large photographs, numbered steps and engineer’s tips on every page.

- How the Kinetico works without electricity – meter disc, control disc, pawls, pistons and valves in plain English
- Anatomy of the head, level by level, so you know exactly what you are looking at
- Which seals wear, which don’t, and exactly where each new one fits
- Fault finder and flowcharts for running to drain, salt problems, hard water and leaks
- Full photographic strip-down and step-by-step reassembly
- Parts identification gallery, parts lists, conversion tables and glossary
- Service log pages and a rebuild checklist to keep your softener on track
Save Hundreds – And Understand Your Softener
✔ Saves money. A Kinetico is often written off for a fault a set of seals would cure. This book shows you how to put it right yourself.
✔ Written by a working engineer with over 25 years of servicing Kinetico water softeners – not a generic DIY writer.
✔ Every step photographed from a real rebuild, so you can see exactly what to do.
✔ No special tools. Ordinary hand tools, a clean table and an afternoon.
✔ A reference you keep. Use it again for the next service – and for every Kinetico you look after.
Who Is It For?
Homeowners who are handy with tools and would rather repair than replace – you don’t need to be a plumber, just patient and careful. Plumbers and engineers who want a clear bench reference for Kinetico heads.
Honest advice: the book shows you how to diagnose and rebuild the head. It can’t mend cracked castings or broken parts – but it will help you spot them, so you know exactly what you need before you spend money.
Book + Seal Kit = Everything You Need
Pair the book with our complete Kinetico seal kit and repair videos, and you have the knowledge, the parts and the know-how to rebuild your softener head yourself.
BOOK DETAILS
Edition: 2027 Edition (updated)
Author: Michael Forty
Format: Paperback, full colour, 6 × 9 inches
Pages: 215, fully illustrated
Independent guide. Kinetico is a registered trademark of Kinetico Incorporated, which does not produce or endorse this book.

